GSO ISO 11789:2014
Gulf Standard
Current Edition
·
Approved on
25 December 2014
·
Powered edgers with rigid cutting means -- Definitions, safety requirements and test procedures
GSO ISO 11789:2014 Files
English
35 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 11789:2014 Scope
This International Standard specifies mechanical safety requirements and test methods applicable to walk-behind powered edgers that employ rigid cutting means with a blade tip circle not more than 305 mm in diameter, and where the plane of the blade tip circle is designed to operate at not more than 15° from the vertical.
This International Standard applies to hand-held portable and powered edgers employing a rigid cutting element with a blade tip circle not more than 305 mm in diameter.
This International Standard also includes test methods for noise and vibration.
This International Standard does not cover edgers with cutting means of non-metallic filament line or freely pivoting non-metallic cutters.
This International Standard does not cover accessories or attachments that alter the function of the machine.
The electrical aspects of electrically powered edgers are not covered by this International Standard. For the electrical requirements applicable to electrically driven machines, reference should be made to IEC 60335-1.
NOTE — For motion control requirements related to self-propelled machines, reference should be made to ISO 5395.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
GSO ISO 11114-6:2024
ISO 11114-6:2022
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
GSO ISO 23598:2024
ISO 23598:2021
Gulf Standard
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints
GSO ISO 22407:2024
ISO 22407:2021
Gulf Standard
Metallic materials — Fatigue testing — Axial plane bending method